Basic Info.
Model NO.
Low consumption Acid Pickling Production line
Production Scope
Product Line
Process Method
Push-Pull Shallow Trough Turbulence Hydrochloric a
Apu Layout Direction
Left to Right When Seating at Operation out Board
Max. Process Speed
120m/Min
Raw Material
Cold-Rolled Carbon Structural Steel, High-Quality
Steel Type
Q195/235, St12/13, SPCC, Spcd and 20#
Transmission Way
AC Driving System, Speed Regulated by Variation
Yield Strength
210~360n/mm 2
Tensile Strength
270~610n/mm 2
Annual Work Plan
300 Days×24 Hours
Transport Package
Plastic Film/Plywood Box / as Clients′ Required
Specification
it depends on the specification
Trademark
Moran or customized
Origin
Hebei, China
HS Code
722100000
Production Capacity
200000 Tons, 5-10 Sets
Product Description
General introduction of Low consumption Acid Pickling Production line/pickle line
Design basis
For coils to be washed:
Cold-rolled carbon structural steel, high-quality carbon structural steel and low alloy steel coils.
Steel type: Q195/235, ST12/13, SPCC, SPCD and 20#
Yield strength: 210~360N/mm 2
Tensile strength: 270~610N/mm 2
Specifications
Coil thickness:2.0~3.5mm
Coil width: 1000~1500mm
Inner diameter of coils to be pickled: ф610mm/760mm
Inner diameter of coils after pickling: ф610mm
Coil outer diameter: max.ф 1800mm
Finished product width:500-750mm
Coil weight: max 27t
Annual work plan: 300 days×24 hours
Energy: water, electricity and vapor
Product form: coils one after another
Production capacity: 200000Ton/year
Max. Process speed: 100m/min
The major technical targets
Process method: Push-pull shallow trough turbulence hydrochloric acid pickling
APU layout direction: From left to right when seating at operation out board
Max. process speed: 120m/min
Threading speed: 10~60m/min
Point move speed: 10~30m/min
Transmission way: AV driving system, speed regulated by variation
frequency
Acid concentration: Max 200 g/L HCL, 125g/L Fe 2+ ,5 g/L Fe 3+
Min. acid pickling time: 26s
Acid trough length in total: about 50m
Whole ACU length: about 120m
Major equipments in turns are as follows:
Crane hoisting coils to skids →coil laoding car→ decoiler (pressure roller,
anti-curve roller) → decoiling scraper → Deflector roll → vertical
guide roller → pinch roller straightener → crop shearer →corner
shearer(with scrap bucket) → vertical guide roller → pre-washing
trough → four-grade hydrochloric acid pickling trough → four-grade
washing trough (Including pre-washing section) → edge blowing device
→ hot air dryer → II# pinch roller → looper (Both ends are equipped
with looper swing stand) → vertical guide roller → pinch centering
machine → circle shearer (With waste edge recoiler) → 3-roller
tension roller → crosscut shearer → vertical guide roller → steering
pinch roller → recoiler → coil unloading trolley → coil receiving stand
→Crane hoisting coils to storage house
Our advantage:
1) Customized Production
2) High cost-effective product
3). All-around pre-sales & after-sales services
4) Independent intellectual property rights
Our advantage:
1) Customized Production
2) High cost-effective product
3). All-around pre-sales & after-sales services
4) Independent intellectual property rights
Hebei Moran provides the customers with all-around, high value-added pre- sales & after-sales services. Factory design, selection of utility & auxiliary facilities, unit process layout, civil foundation design reference, as well as the well-rounded training combined with theory and hands-on exercises for line operators and maintainers, all are freely available.
For More information, Please feel free to contact us!
Thomas Qian
Website: moranchina.en.made-in-china.com
Design basis
For coils to be washed:
Cold-rolled carbon structural steel, high-quality carbon structural steel and low alloy steel coils.
Steel type: Q195/235, ST12/13, SPCC, SPCD and 20#
Yield strength: 210~360N/mm 2
Tensile strength: 270~610N/mm 2
Specifications
Coil thickness:2.0~3.5mm
Coil width: 1000~1500mm
Inner diameter of coils to be pickled: ф610mm/760mm
Inner diameter of coils after pickling: ф610mm
Coil outer diameter: max.ф 1800mm
Finished product width:500-750mm
Coil weight: max 27t
Annual work plan: 300 days×24 hours
Energy: water, electricity and vapor
Product form: coils one after another
Production capacity: 200000Ton/year
Max. Process speed: 100m/min
The major technical targets
Process method: Push-pull shallow trough turbulence hydrochloric acid pickling
APU layout direction: From left to right when seating at operation out board
Max. process speed: 120m/min
Threading speed: 10~60m/min
Point move speed: 10~30m/min
Transmission way: AV driving system, speed regulated by variation
frequency
Acid concentration: Max 200 g/L HCL, 125g/L Fe 2+ ,5 g/L Fe 3+
Min. acid pickling time: 26s
Acid trough length in total: about 50m
Whole ACU length: about 120m
Major equipments in turns are as follows:
Crane hoisting coils to skids →coil laoding car→ decoiler (pressure roller,
anti-curve roller) → decoiling scraper → Deflector roll → vertical
guide roller → pinch roller straightener → crop shearer →corner
shearer(with scrap bucket) → vertical guide roller → pre-washing
trough → four-grade hydrochloric acid pickling trough → four-grade
washing trough (Including pre-washing section) → edge blowing device
→ hot air dryer → II# pinch roller → looper (Both ends are equipped
with looper swing stand) → vertical guide roller → pinch centering
machine → circle shearer (With waste edge recoiler) → 3-roller
tension roller → crosscut shearer → vertical guide roller → steering
pinch roller → recoiler → coil unloading trolley → coil receiving stand
→Crane hoisting coils to storage house
Our advantage:
1) Customized Production
2) High cost-effective product
3). All-around pre-sales & after-sales services
4) Independent intellectual property rights
Our advantage:
1) Customized Production
2) High cost-effective product
3). All-around pre-sales & after-sales services
4) Independent intellectual property rights
Hebei Moran provides the customers with all-around, high value-added pre- sales & after-sales services. Factory design, selection of utility & auxiliary facilities, unit process layout, civil foundation design reference, as well as the well-rounded training combined with theory and hands-on exercises for line operators and maintainers, all are freely available.
For More information, Please feel free to contact us!
Thomas Qian
Website: moranchina.en.made-in-china.com