550mm~1500mm Coil Width Carbon Steel Sheet Strip Coating Machine Pickling Line

Hebei Moran Environmental Protection Technology.,Ltd is one of main metallurgical equipment factory in China. our products include new and used steel and aluminum rolling mill,2hi 4hi 6hi 8hi to 20 hi rolling mill machine, skin pass mil, tension leverler, tension leverler and skin pass mix mill, caster, steel coating line, pickling line ,annealing furnance,grinder, and other related equipment and its parts.our machine has been exported to many country and enjoy a very good reputation among our users.

for more detail pls contact us







Design gist
For coils to be washed:
Cold-rolled carbon structural steel, high-quality carbon structural steel and low alloy steel coils.
Steel type: Q195/235, ST12/13, SPCC, SPCD and 20#
Yield strength: 210~360N/mm 2
Tensile strength: 270~610N/mm 2
Specifications
Coil thickness:1.8~4.0mm
Coil width: 600~1300mm
Inner diameter of coils to be pickled: ф610mm/760mm
Inner diameter of coils after pickling: ф610mm
Coil outer diameter: max.ф 2000mm
Coil weight: max 26t
Annual work plan: 300 days×24 hours
Energy: water, electricity and vapor
Product form: coils one after another
Production capacity: 300000Ton/year
Max. Process speed: 120m/min
 The major technical targets
Process method: Push-pull shallow trough turbulence hydrochloric acid pickling
APU layout direction: From left to right when seating at operation out board
Max. process speed: 120m/min
Threading speed: 10~60m/min
Point move speed: 10~30m/min
Transmission way: AV driving system, speed regulated by variation
frequency
Acid concentration: Max 200 g/L HCL, 125g/L Fe 2+ ,5 g/L Fe 3+
Min. acid pickling time: 26s
Acid trough length in total: about 50m
Whole ACU length: about 120m
Electricity: installed capacity: about 1150kw, 380v
Including:
Major transmission (AC frequency conversion motor) installed capacity: 600kw
Auxiliary equipments (Constant AC motor) installed capacity: 550kw
The two parties' electricity connection is separated by Party B control
cabinet inlet line switch upper port; Party B's switch is protected and will
provide relevant installed capacity. Cables and span structure except the
controlling cabinet shall be provided by Party A.
Note: Workshop public facilities electricity energy is not included.
Compressed air: 0.4~0.6Mpa, purified air: 4 Nm 3  per min
Water: Rinsing water is soft water. Consumption on average is about 5 m 3
per hour
Vapor: Providing capacity is 6.5t/h(p=0.5Mpa 151ºC saturated vapor),
actual consumption on average is about 6t/h
Waste air discharge amount: about 16000 m 3  per hour
Pollution control: Waste liquid: rinsing water: 5 m 3  per hour, including
HCL less than 10g/L
Waste air: HCL content is less than 20mg/ m 3
The whole APU length:113m
Plant width: 33m